Fusion - Application Sponge

Fusion™ Tough Coat Application Sponges have been made to take the stress away from your top coat step! 

Made with an ergonomic grip, the sponges provide extra stability and ease while applying Tough Coat.  

It is easiest to pour Fusion™ Tough Coat on a disposable paper plate.  Slightly dampen the sponge with water and dip it evenly into the product. Start at one end of your project and do a solid swipe in one direction. Repeat this process over your entire piece.  Ensuring you always wipe your sponge in one direction only. Do not wipe backwards over the wet Tough Coat surface. Wiping backwards will cause air bubbles to form in your Tough Coat. To ensure a smooth, streak free application wipe in one direction.  

Let the Tough Coat dry for approximately 2-4 hours and then repeat the process.  

When using these sponges, keep them in a zip lock bag with the air removed to prevent it from drying between coats.  

Clean up time is super easy.  Use Fusion Brush Soap and water to rinse out the residue in your sponge.  Rinse well and let dry.  Keep your sponge for future projects.  You can reuse your sponge for approximately 3-5 times.

Visit www.fusionmineralpaint.com for further information.