PC Extreme Guard

Extreme Guard Topcoat is a water resistant, low VOC, extremely durable top coat that also doubles as a clear bonding primer.   Paint Couture Extreme Guard Topcoat includes built-in UV protection.  Extreme Guard also contains built-in mould and mildew resistant properties and is designed for craft projects, furniture, cabinets, outdoor use, and other high traffic surfaces. 

Extreme Guard Topcoat can be used on top of Paint Couture paints, metallics, textures, and glazes.  Extreme Guard Topcoats may be used over many products, it is recommended that a test sample be done, prior to starting your actual work.  

Available in Flat, Gloss, Semi Gloss & Satin.

APPLICATION: Do not shake but stir thoroughly before use.  If you accidentally shake, let container sit for one hour prior to use to avoid bubbles on your project.  Apply in even thin layers.  Be sure Paint Couture Paint has fully dried at least four hours and glazed pieces 24 hours before applying topcoat.  Apply Paint Couture Extreme Guard Topcoat with a good quality synthetic brush, foam brush, or roller, or use a sprayer.  It may be lightly sanded 45 minutes after the first coat.  If adding a second coat of Extreme Guard Topcoat, allow the first coat to dry for two hours.  Once dry, lightly sand with 400 grit sandpaper, wipe away any dust residue, then apply the second coat.  Paint Couture Topcoat products are recommended for a more durable finish.  Not for use on decks or floor surfaces.

Clean up is easy with just soap and water.  Don’t forget to add a ‘Core Soap’ to your order!